This ready-for-use water-based ink can be used straight out of the container or it can be blended with other ready-for-use colours or base to make custom colours. Ideally, this ink is made for use on textiles such as cotton, linen, cotton-poly blends, some terry-cotton blends, and on heavier card stock or paper.
The recommended curing temperature for fabrics is 300F for 2 to 3 minutes through a conveyor dryer. Without a conveyor dryer we recommend the addition of a crosslinker (Bondit pro 3 catalyst) to the ink. The print should then air dry for about 48 hours before using a Teflon sheet or a sheet of parchment to heat set the print with a heat press or an iron. CAUTION: Always test for ink cure by washing the garment. Make adjustments as needed.
On card stock, use the ink as is from the container and air dry.
